Use Other Equipment With Your Flat Panel Display
Power On Mode
This option automatically selects the input when the panel is turned On.
Parameter
INPUT 1 through INPUT 8 displays the selected input
Last*
Note: This setting applies to all input sources.
Mirror Mode
This option reverses the image displayed on the screen.
Parameter
On
Off*
Note: This setting applies to all input sources.
Banner PIP
Use the Banner PIP option to adjust the translucence rate and display positions of the small window in P-in-P
mode.
• Translucent: adjusts the translucent rate of the small screen in P-in-P mode between Off and 80%. If the
percentage increases, the translucent rate also increases.
• Banner PIP: adjusts the display positions of the small screen in P-in-P mode
• Banner Input: determines the input signal for the small window in P-in-P mode
Translucent
Banner PIP
Banner Input
displays the last input selected
reverses the image
does not reverse the image
Parameter
On
adjusts the translucent rate
Off*
No effect
Off*
No effect
Bottom 1 through 3 adjusts display positions
Mid Low/High
Top 1 through 3
INPUT 3* through 8 determines the input signal
Description
*Factory default
Description
*Factory default
Description
*Factory default
06
73
En