Table of Contents
Advertisement
26
en | Hardware setup
terminating. There is no need to add a terminator to the output connector if no additional
equipment is connected.
If the camera signal is looped-through to additional equipment, make sure that the end of the
video line is terminated with 75 ohm termination.
The DivarXF automatically configures itself as a PAL or NTSC unit. The unit determines the
standard by detecting the signal format of the first connected camera (lowest camera input
number).
Specifications
Input signal: Composite video 1 Vpp, 75 ohm
Color standard: PAL/NTSC, auto-detect
Gain control: Automatic or manual gain control for each video input
Connector type: BNC looped-through, automatic termination
Figure 4.5 Eight video inputs with loop-through outputs
4.5
Audio connections
The DivarXF supports up to 16 audio inputs and 4 audio outputs. Connect using audio cable
with RCA compatible connectors.
Specifications
Input signal: Mono RCA, 1 Vpp, 10k ohm
Output signal: Dual mono RCA, 1 Vpp, 10k ohm
Audio in
Figure 4.6 Audio input connectors
L
R
Audio out
Figure 4.7 Audio output connectors
4.6
Monitor connections
Up to two monitors can be connected through the VGA, CVBS, or Y/C connections.
4.6.1
VGA
Connect the unit to one or two VGA monitors using standard VGA cable. It is advised to use
17" monitors or larger when using LCD(s).
F.01U.135.429 | 2.5 | 2009.08
1
2
3
1
2
3
1
3
5
7
9
2
4
6
8
10
A
B
4
5
6
Video in
4
5
6
Video out
11
13
15
12
14
16
Installation manual
7
8
7
8
Bosch Security Systems
Divar XF
Advertisement
Table of Contents
