Osd Settings; Lens; Shutter/Agc - JVC TK-T8101WPRU Instructions Manual

3. OSD Settings

Use the OSD menu to set up the camera for optimum performance
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PICT ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL

3.1 Lens

The LENS settings allow you to configure Lens and brightness. Options are AUTO (Auto Iris lens) and
MANUAL. The default setting is AUTO.
In the AUTO submenu, you can set the MODE as OPEN, CLOSE or AUTO. Then select SPEED to
adjust the DC Iris Lens convergence speed.

3.2 SHUTTER/AGC

You can set the SHUTTER/AGC as AUTO or MANUAL. The default setting is AUTO.
When LENS is set to AUTO: It is recommended to set SHUTTER/AGC to AUTO mode. In the AUTO
submenu, adjust HIGH LUMINANCE MODE according to your application:
• AUTO IRIS mode: Use this for normal condition application environments. The IRIS level will be
controlled by camera brightness.
• SHUT+AUTO IRIS mode: Use this for high light application environments. The exposure will be
controlled by AES or the DC Iris. The iris level will be controlled by camera brightness.
Menu Settings
PRIVACY OFF
DAY/NIGHT AUTO
NR
CAMERA ID OFF
SYNC INT
LANGUAGE ENGLISH
CAMERA RESET
BACK
EXIT SAVE ALL
Figure 3-1 Main menu
TYPE DC
MODE OPEN
SPEED 046
RETURN
HIGH LUMINANCE
MODE AUTO IRIS
BRIGHTNESS 024
LOW LUMINANCE
MODE AGC
BRIGHTNESS x 0.25
RETURN
10