Table of Contents
Advertisement
OSD SETTINGS
3. OSD Settings
Use the OSD menu to set up the camera for optimum performance.
LENS
SHUTTER/AGC
WHITE BAL
BACKLIGHT
PICT ADJUST
ATR
MOTION DET
NEXT
EXIT
3.1 Lens
The LENS settings allows you to configure Lens and brightness. Options are AUTO
Iris lens)
and MANUAL. The default setting is AUTO.
In the AUTO submenu, you can set the MODE as OPEN, CLOSE or AUTO. Then select
SPEED to adjust the DC Iris Lens convergence speed.
3.2 SHUTTER/AGC
You can set the SHUTTER/AGC as AUTO or MANUAL. The default setting is AUTO.
When LENS is set to AUTO: It is recommended to set SHUTTER/AGC to AUTO
mode. In the AUTO submenu, adjust HIGH LUMINANCE MODE mode according to
your application:
• AUTO IRIS mode: Use this for normal condition application environments. The
IRIS level will be controlled by camera brightness.
• SHUT+AUTO IRIS mode: Use this for high light application environments. The
exposure will be controlled by AES or the DC Iris. The iris level will be controlled
by camera brightness.
AUTO
PRIVACY
AUTO
DAY/NIGHT
ATW
NR
OFF
CAMERA ID
SYNC
OFF
LANGUAGE
OFF
CAMERA RESET
BACK
SAVE ALL
EXIT
Figure 3-1 OSD Main Menu
TYPE
MODE
SPEED
HIGH LUMINANCE
MODE
BRIGHTNESS
LOW LUMINANCE
MODE
BRIGHTNESS
10
OFF
AUTO
OFF
INT
ENGLISH
SAVE ALL
DC
OPEN
046
AUTO IRIS
024
AGC
x0.25
(Auto
Advertisement
Table of Contents
