Table of Contents
Advertisement
OSD SETTINGS
• PUSH: When selected in the appropriate position, the whole area will perform
white balance.
• PUSH LOCK: When selected in the appropriate position, WHITE BALANCE will
perform once.
3.4 BACKLIGHT
Set Backlight compensation function. It controls the light level to overcome
sever backlight conditions. Available options include OFF, BLC or HLC (Highlight
Compensation) mode. The default is OFF.
If HLC is selected, HLC is activated automatically when the camera detects high-
luminance.
3.5 PICT ADJUST
PICTURE ADJUST allows you to adjust picture settings for optimal image. In the PICT
ADJUST submenu, you can adjust BRIGHTNESS, CONTRAST, SHARPNESS, HUE and
GAIN value. In addition, you can set MIRROR to ON to reflect the image.
3.6 ATR*
Set ATR (Adaptive Tone-curve Reproduction) function. You can select ON or OFF. The
default is OFF. If selecting ON, you will enter the ATR submenu, where you can set
LUMINACE and CONTRAST to optimize by image.
*Also known as Wide Dynamic Range. This function expands the video dynamic range
of the camera and improves visibility of images even in high contrast environments.
3.7 MOTION DET
MOTION DET allows to detect moving objects on the screen. The default is OFF. If
selecting ON, you will enter the MOTION DET submenu. You can set up to 4 motion
areas to detect moving objectives and adjust the motion detection sensitivity from 0
to 127.
3.8 PRIVACY
PRIVACY function mask up to 8 privacy areas on the screen from video monitoring.
The default setting is OFF. If selecting ON, you will enter the PRIVACY submenu. You
can
configure up to 8 privacy areas and set
zones. In addition, you can enable MOSAIC function for the privacy zone.
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
LUMINANCE
CONTRAST
color and transparency of the privacy
12
OFF
000
128
128
128
128
LOW
LOW
Advertisement
Table of Contents
