Table of Contents
Advertisement
Important Safety Information
Warning and Operating Notes
Installation and serving the camera should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain your warranty.
WARNING!
are required to ensure compliance.
Note:
This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked
"Class 2" or Listed Adapter marked "L.P.S." (or "Limited Power Source") and rated
output DC 12V, 0.415A minimum or AC 24V, 60Hz, 0.415A minimum.
WARNING!
product to rain or moisture.
Caution
Operating Notes
Power
Supply: This dome camera can operate on AC 24V or DC 12V.
Note
Operating Conditions
• Avoid viewing very bright objects (example, light fixtures) for extended periods.
• Avoid operating or storing the unit in the following locations:
- Extremely humid, dusty, hot, cold environments (where the operating
temperature is outside the recommended range of 14°F to 122°F [-10°C to
+50°C].)
- Close to sources of powerful radio or TV transmitters
- Close to fluorescent lamps or objects reflecting light
- Under unstable light sources (may cause flickering)
The use of CSA certified/ UL Listed Class 2 power adapters
To reduce the risk of fire or electric shock, do not expose the
Connect only one camera to the power line, AC24V/DC12V.
Do not share the power line with other equipment. The
power cable between power source and the camera must
be under 3 m.
Connectors and field wiring terminals for external Class 2
circuits provided with marking indicating minimum
of wiring to be used.
the field wiring terminals .
Class 2 shall be marked adjacent to
1
(for USA)
Class
Advertisement
Table of Contents
