Step 1: Installation - Sony Ipela NSR-S10 Quick Start Manual

Important
You can download the latest firmware for NSR-S10/S20
from the following URL. For the firmware update
procedure, refer to the User's Guide (PDF).
http://www.sony.co.jp/Products/NSR/NSR-S.zip
4

Step 1: Installation

Step 1: Installation
Decide where the unit is to be installed, and then connect
all of the equipment.
Preparing Devices
Prepare the following devices based on your intended
use.
• Monitor
• Monitor cable (if necessary)
• USB keyboard
• USB mouse
• Network camera
• Network switch
• LAN cable
Note
Even if no USB keyboard is connected, the screen-based
soft keyboard can be used.
Connecting Each Device
Connect the monitor, USB mouse, and USB keyboard to
the appropriate connectors on the front panel of the unit.