Table of Contents
Advertisement
5. API for Acquiring/Changing Parameters of VN-E4 _
5.12. Time
The APIs below are related to time. These are equivalent to the features on the Time page of the WEB setting page. Refer to the instruction
manual for details on the Time page.
Acquiring NTP Client Feature On/Off Status from VN-E4
Format
Example of Response
Interpretation
Allowed users
Setting NTP Client Feature Status to On/Off for VN-E4
Format
Example
Example of Response
Interpretation
Allowed users
Acquiring NTP Server Address from VN-E4
Format
Example of Response
Interpretation
Allowed users
Setting NTP Server Address for VN-E4
Format
Example
Example of Response
Interpretation
Allowed users
Acquiring Access Interval to NTP Server from VN-E4
Format
Example of Response
Interpretation
Allowed users
/api/param?network.ntp.status
network.ntp.status=off&200 OK
Acquire the on/off status of NTP client. Either on or off will be returned.
admin, operator, user
/api/param?network.ntp.status=data
/api/param?network.ntp.status=on
network.ntp.status&200 OK
Change the on/off status of NTP client. Specify as on or off. Upon setting this API, execute the
"network.interface.status=restart" API for enabling network setting changes to enable the new settings.
admin, operator
/api/param?network.ntp.host
network.ntp.host=10.0.0.100&200 OK
Acquire the address of the NTP server. Either the IP address or FQDN will be returned.
admin, operator, user
/api/param?network.ntp.host=data
/api/param?network.ntp.host=10.0.0.100
network.ntp.host&200 OK
Change the address of the NTP server. Specify the IP address or FQDN. Upon setting this API, execute the
"network.interface.status=restart" API for enabling network setting changes to enable the new settings.
admin, operator
/api/param?network.ntp.interval
network.ntp.interval=100&200 OK
Acquire the interval for accessing the NTP server. Unit is in minutes.
admin, operator, user
5.12. Time
56
Advertisement
Table of Contents
