Table of Contents
Advertisement
5. API for Acquiring/Changing Parameters of VN-E4 _
Setting PPPoE Status to On/Off for VN-E4
Format
Example
Example of Response
Interpretation
Allowed user
Acquiring PPPoE User Name from VN-E4
Format
Example of Response
Interpretation
Allowed users
Setting PPPoE User Name for VN-E4
Format
Example
Example of Response
Interpretation
Allowed user
Setting PPPoE Password for VN-E4
Format
Example
Example of Response
Interpretation
Allowed user
/api/param?network.interface.pppoe.status=data
/api/param?network.interface.pppoe.status=on
network.interface.pppoe.status&202
Required(network.interface.status=restart)
Change the on/off status of PPPoE. Set to on or off. Upon changing PPPoE, VN-E4 will be rebooted using the
"network.interface.status=restart" API for enabling settings. As such, access will not be possible for about 1
minute. Additionally, the DHCP client feature will be turned off automatically when PPPoE is set to on.
admin
/api/param?network.interface.pppoe.user
network.interface.pppoe.user=somename&200 OK
Acquire the PPPoE user name.
admin, operator
/api/param?network.interface.pppoe.user=data
/api/param?network.interface.pppoe.user=somename
network.interface.pppoe.user&202
Required(network.interface.status=restart)
Change the PPPoE user name. Set a user name that is within 60 bytes. Upon changing PPPoE, VN-E4 will be
rebooted using the "network.interface.status=restart" API for enabling settings. As such, access will not be
possible for about 1 minute.
admin
/api/param?network.interface.pppoe.password=data
/api/param?network.interface.pppoe.password=someword
network.interface.pppoe.password&202
Required(network.interface.status=restart)
Change the password of PPPoE. Set a password that is within 60 bytes. Upon changing PPPoE, VN-E4 will be
rebooted using the "network.interface.status=restart" API for enabling settings. As such, access will not be
possible for about 1 minute. There is no API for acquiring passwords.
admin
5.9. Network Details
51
Advertisement
Table of Contents
