Table of Contents
Advertisement
5. API for Acquiring/Changing Parameters of VN-E4 _
Acquiring "POP before SMTP" Setting from VN-E4
Format
Example of Response
Interpretation
Allowed users
Setting "POP before SMTP" for VN-E4
Format
Example
Example of Response
Interpretation
Allowed users
Acquiring POP Server Address Setting from VN-E4
Format
Example of Response
Response example
when setting field is
left blank
Interpretation
Allowed users
Setting POP Server Address for VN-E4
Format
Example
Example of Response
Interpretation
Allowed users
Acquiring POP Server Port Number Setting from VN-E4
Format
Example of Response
Interpretation
Allowed users
/api/param?application.smtp.type
application.smtp.type=pbs&200 OK
Acquire the "POP before SMTP" setting. simple is returned when this is set to off. pbs is returned when this is
set to on.
admin, operator, user
/api/param?application.smtp.type=data
/api/param?application.smtp.type=pbs
application.event.smtp.type&200 OK
Change the "POP before SMTP" setting. Specify as simple when setting to off and pbs when setting to on.
admin, operator
/api/param?application.pop.host
application.pop.host=10.0.0.200&200 OK
application.pop.host=&200 OK
Acquire the address setting of the POP server.
admin, operator, user
/api/param?application.pop.host=data
/api/param?application.pop.host=10.0.0.200
application.pop.host&200 OK
Change the address setting of the POP server. Specify the IP address or FQDN. The maximum FQDN size is
60 bytes. Specify as 0.0.0.0 when the POP server is not set. It is also possible to leave the setting field blank as
follows.
/api/param?application.pop.host=%00
admin, operator
/api/param?application.pop.port
application.pop.port=110&200 OK
Acquire the port number setting of the POP server.
admin, operator, user
5.5. Alarm Environment Setting
32
Advertisement
Table of Contents
