Dell Streak User Manual page 142

If the device cannot power on due to system corruption, take either of these recovery
actions:
Reset your device to the default state
Press and hold the power button
1
screen to turn off the device.
Simultaneously press and hold the volume up button
2
button
Without releasing the volume buttons, press and hold the power button, until the
3
device turns on the configuration screen.
Press the volume buttons to move the highlight bar on the screen to the Factory reset
4
option.
Press the Camera button
5
Wait for the device to reboot.
6
Start software recovery
Take out the microSD card from the device.
1
Connect the microSD card to your computer using a microSD adapter.
2
On your computer, go to support.dell.com and follow the instructions to download
3
the software upgrade package to the microSD card.
NOTE:
The device only recognizes the software upgrade package as "Update.pkg".
Rename the downloaded package to "Update.pkg" if it is not named so.
Disconnect the microSD card from the computer and install the microSD card into
4
the device.
Follow steps 1 to 3 in Reset your device to the default state to turn on the
5
configuration screen.
Press the volume buttons to move the highlight bar to the Software upgrade via
6
Update.pkg on SD Card option, and press the Camera button
selection.
Press the Camera button
7
NOTE:
If you wish to cancel software recovery, press the volume down button
Wait for the device to load files and reboot the system.
8
142
Troubleshooting
.
to start the reset process.
to confirm and start software recovery.
and then touch the Power off option on the
and volume down
to confirm your
.