HP 4400 Software Manual page 52

commands. I/O processing does not begin until the hosts complete recovery from the disruption
of resynchronization. Other code in the array, such as I/O module firmware, is updated,
which can take up to 10 minutes to complete. During this interval, the Storage System Updating
Firmware page opens
Figure 23 Storage System Updating Firmware
13. A final Confirm System Code Load window opens
uppercase) and click Code Load System to proceed.
Figure 24 Final code load confirmation window
14. Select the array in the navigation pane and the Initialized Storage System Properties window
appears
box. It should be 10000000.
52 Upgrading the Enterprise Virtual Array
(Figure 23 (page
(Figure 25 (page 53)). Verify the version of the controller software in the Version
52)).
(Figure 24 (page 52)). Enter YES (all