Dell PowerConnect 2708 User Manual page 46

Configuring DHCP Client
Open the IP Addressing page.
1
Change the DHCP to Enable.
2
Click Apply Changes.
3
The switch requests from the DHCP server to assign a new dynamic IP Address, Subnet
Mask, and Default Gateway Address to manage the device. The dynamic DHCP IP Address,
DHCP Subnet Mask, and DHCP Default Gateway Address are displayed.
NOTE:
Check the box for Apply DHCP Address.
4
NOTE:
received from the DHCP server are saved and configured in the device only after the Apply Changes
button is clicked on. A reset-to-Default recovers the device default configuration.
Click Apply Changes.
5
The new dynamic DHCP Address is configured in the switch.
Enter the new DHCP Address in the Browser address line.
6
The switch is reconnected to the new DHCP client address.
46
The displayed values are not configured to the device. Record the updated dynamic fields.
The new dynamic DHCP IP Address, DHCP Subnet Mask, and DHCP Default Gateway Address