Creating Vlan Membership - Dell PowerConnect 2708 User Manual

Current — Shows what the current status is for Jumbo Frames support.
After Reset — Indicates the Jumbo Frames status after the next time the switch is powered on.
Enabling Jumbo Frames
Open the Jumbo Frames page.
1
Select Enabled in the Jumbo Frames field.
2
Click Apply Changes.
3
The Jumbo Frames are enabled on the device after power cycling.

Creating VLAN Membership

The VLAN Membership page contains a port table for assigning ports to VLANs. Ports are assigned
VLAN membership by toggling through the Port Control settings.
The VLAN Membership page contains fields for defining VLAN groups. The switch supports the
mapping of 4094 VLAN IDs up to 64 VLANs.
The VLAN Membership page also displays the VLAN ID currently defined and enables to
statically create a new VLAN. To open the page, click VLAN Membership in the tree view.
Figure 6-5. VLAN Membership
Ports can have the following values:
T — The interface is a member of a VLAN. All packets forwarded by the interface are tagged.
These packets contain VLAN information.
U — The interface is a VLAN member. Packets forwarded by the interface are untagged.
50