D-Link DG-102S User Manual page 59

Command Line Interface
General Setup Commands
nwdbg dns <disable|enable>
Definition:
Parameter(s):
Example:
nwdbg country <code>
Definition:
Parameter(s):
Example:
nwdbg config
Definition:
Parameter(s):
Example:
This command turns on/off the DNS function. If only
nwdbg dns is typed, this command shows the DNS
IP/STATE.
[disable | enable]
nwdbg dns disable
This command provides country code setting interface
to config the tone frequency for different country. If only
nwdbg country is typed, this command shows the
COUNTRY CODE.
<0:USA (Default), 1:Japan, 2:Hong Kong, 3:Sweden>
nwdbg country 1
This command shows all the configuration settings
made by nwdbg commands.
None.
nwdbg config
59