Snmp Functions; D-Link Dge-530T User Manual - D-Link DGE-530T User Manual

Section  - SNMP Agent
Now you can use any MIB browser, for example the D-Link MIB compiler, to view information on the workstation with
the DGE-530T card SNMP Agent feature.
The D-Link Network Adapter SNMP Agent supports the following functions of the dlk_pc.mib:
Function
hrSystemUptime
hrSystemDate
hrSystemTimeZone
hrSystemInitialLoad Device
hrSystemInitialLoadParameter
hrSystemNumUsers
hrSystemProcesses
hrSystemMaxProcesses
hrSystemAddress
hrSystemNetMask
hrSystemDefaultRouter
hrSystemMacAddr

D-Link DGE-530T User Manual

SNMP Functions

The amount of time since this host was last initialized.
The host's notion of the local date and time of day.
The current local time zone, expressed in hours west of Greenwich. If unknown,
the value - 1 shall be returned.
This index of the hrDeviceEntry pertaining to the device that this host is configured
to load its initial operating system configuration from.
This object contains the parameter (e.g. a pathname) supplied to the load device
when requesting the initial operating system configuration from that device.
The number of distinct users currently using CPU or memory resources on this
host.
The number of process contexts currently loaded or running on this system.
The maximum number of process contexts this system can support. If there is no
fixed maximum, the value should be zero.
The IP address of the interface.
The IP net mask for this interface.
The default gateway for this IP interface.
The MAC address of this IP interface. For interfaces that do not have such an
address (e.g., a serial line), this object should contain an octet string of zero
length.
Description