Statically Assign An Ip Address - D-Link DGE-530T User Manual

Appendix A - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below.
Step 1:
Windows 2000: Click on Start > Settings > Control Panel > Network Connections
®
Windows XP: Click on Start > Control Panel > Network Connections
: Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
Windows Vista
™
network connections
Step 2:
Right-click on the Local Area Connection, which represents your D-Link network adapter, and select Properties.
Step 3:
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4:
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN
IP address on your router.
Example: If the router's LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between
2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the
LAN IP address of your router (192.168.0.1).
D-Link DGE-530T User Manual