Installation; Unpack And Inspect; Driver Installation - D-Link DGE-530T User Manual

Section  - Installation

Unpack and Inspect

CAUTION: Under ordinary circumstances, a DGE-530T card will not be affected by a static charge that may be received
through your body during handling of the unit. In special circumstances, the user may carry an extraordinarily high static
charge and it is good practice to reduce the charge by touching a ground before handling the adapter card.
Open the shipping carton and carefully remove all items. Ensure that the following items are included:
• One DGE-530T Gigabit Ethernet Adapter Card
• DGE-530T Drivers and Manual on CD-ROM
If any of these items are missing or damaged, please contact your local reseller for replacement.

Driver Installation

Turn on your computer and Insert the D-Link DGE-530T Driver CD in the CD-ROM drive. The step-by-step instructions
that follow are shown in Windows
If the CD Autorun function does not automatically start on your computer,
go to Start > Run. In the run command box type "D:\autorun.exe"
(where D: represents the drive letter of your CD-ROM drive).
Drivers for non-Windows operating systems are located on the D-Link
CD.
When the autorun screen appears, click Install Drivers.
D-Link DGE-530T User Manual

Installation

XP. The steps and screens are similar for the other Windows operating systems.
®