D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter User Manual page 21

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below.
Step.1
Windows 2000: Click on Start > Settings > Control.Panel > Network.Connections.
®
Windows XP : Click on Start > Control.Panel > Network.Connections.
®
Windows Vista : Click on Start > Control. Panel > Network. and. Internet > Network. and. Sharing. Center > Manage. network.
™
connections.
Step.2
Right-click on Local.Area.Connection which represents your D-Link network adapter and select Properties.
Step.3
Highlight Internet.Protocol.(TCP/IP) and click Properties.
Step.4
Click Use.the.following.IP.address and enter an IP address that is on the same subnet as your network or the LAN IP address on your
router.
D-Link DGE-560T User Manual