Adding A Second Microphone; Adjusting Audio Levels - Epson AP-60 - Projector Sound Solution User Manual

Adding a Second Microphone

Follow the steps below to connect a second microphone to the AP-60.
1 Check the channel selector switch on top of the pendant microphone and note what channel it's set to.
2
Set the second microphone to the opposite channel and turn it on.
3
Verify that the Mic light for the second microphone is illuminated on the AP-60. The light on the AP-60
should match the channel selected on the second microphone.

Adjusting Audio Levels

If you notice that external audio sources are louder than your voice, follow the steps below to adjust the audio to
the desired levels.
1 Adjust the Gain control wheel until the white line on the Gain control wheel is next to Up, but still visible.
2 Speak into the pendant microphone and use the volume control on your external audio sources to adjust the
volume. A good mix is when your voice is slightly louder than the external audio source.
Channel selector
Mic lights
Gain control wheel
16