Installing The Projector Feet; Removing And Attaching The Cable Cover - Epson BrightLink 475Wi User Manual

Installing the Projector Feet

To use the projector on a table or cart, you first need to install the feet. You can then use the feet to
adjust the image position.
1. Turn the projector upside down.
2. Insert the front foot into the hole at the front of the projector.
1 Front foot
2 Rear feet
3. Insert the two rear feet into the holes at the back of the projector.
Parent topic:

Removing and Attaching the Cable Cover

Before you can connect equipment to your projector, you need to remove the cable cover.
1. Remove both of the cable cover screws (screwdriver not included).
Setting Up the Projector
33