Connecting To An External Computer Monitor; Connecting To External Speakers - Epson BrightLink 475Wi User Manual

Parent topic:

Connecting to an External Computer Monitor

If you connected the projector to a computer using a Computer port, you can also connect an external
monitor to the projector. This lets you see your presentation on the external monitor even when the
projected image is not visible.
Note: Monitors that use a refresh rate less than 60 MHz may not be able to display images correctly.
1. Make sure your computer is connected to the projector's Computer port. If there are two computer
ports, make sure you use the Computer1 port.
2. Connect the external monitor's cable to your projector's Monitor Out port.
Parent topic:

Connecting to External Speakers

To enhance the sound from your presentation, you can connect the projector to external speakers with
built-in amplifiers. You can control the volume using the projector's remote control.
If you want to output audio from the external speakers when the projector is turned off, you need to
adjust the Standby Setup settings in the projector's Extended menu.
Note: The projector's built-in speaker system is disabled when you connect external speakers.
1. Make sure your computer or video source is connected to the projector with both audio and video
cables as necessary.
Connecting to Video Sources
Projector Connections
43