HP Integrity rx1600 Deployment Manual page 17

Smartsetup scripting toolkit deployment guide: hp integrity servers with linux

Hide thumbs Also See for Integrity rx1600:

Table of Contents

# ./mkrep.sh

The SSTK Repository Maker Linux distribution selection menu is displayed.

Select the appropriate Linux distribution, and then select OK.

An SSTK Repository Maker menu similar to the following is displayed.

The Repository Maker main menu provides the three tasks required to create your repository.

Default configurations are provided for the destination directory and CD mount points that

can be used to immediately create the repository with the Make Repository selection. The

Destination Directory default is the directory into which you extracted the

SSTK-LinuxIntegrity-3.3.tgz package. The default CDROM devices is /dev/cdrom.

To use the default repository configuration skip to the next step, or use the following steps

to configure specific repository information:

Select Destination Directory and click OK.

Select the destination directory by navigating to the correct directory, and then click

OK.

Select CDROM Device and click OK.

Planning the Deployment

Table of Contents