Channel List; Manual Tuning; Auto Setup - Panasonic DMRBW880 Operating Instructions Manual

∫ Channel List

You can edit the Channel List.
Digital TV Channel List
1
2
3
4
5
6
7
Select
Hide
RETURN
Tune Swap Reveal all
To skip unwanted channels
1 Select the channel.
2 Press [OK].
≥The check mark is removed.
≥"Yellow" : Clear the all skip setting.
To change the channel number assignment
1 Select the channel, then press the "Green" button.
2 Enter the channel number to reassign with the number
buttons.
e.g., 5:
15:
115:
3 Press [OK].
≥If another channel is already assigned to the channel
number, the two channels will be switched.
To set the channel manually
Press the "Red" button.
"Digital TV Manual Tuning" screen appears. (
≥ When channel numbers are added using "Update Channel List"
( right) or "Manual Tuning" (
assigned to the added channels.

∫ Auto Setup

You can restart the Easy setting. (
Select "Yes", then press [OK].
∫ Download from TV
Select "Download from TV" when you connect the unit to a
VIERA Link (HDAVI Control 3) compatible TV with an HDMI
cable.
Select "Yes", then press [OK].
Channel names
[0] [0] [5]
[0] [1] [5]
[1] [1] [5]
right)
right), numbers from 800ch will be
18)

∫ Manual Tuning

You can set each channel manually.
Digital TV Manual Tuning
Physical Channel [ ]
Signal Quality 0
0
Signal Strength
No. Channel Name
Digital TV:0 Radio:0
Select physical channel
Start tuning
Select offset
RETURN
1 Select the channel.
2 Adjust the frequency.
≥Adjust the frequency by checking the signal strength
and signal quality displays.
3 Press [OK] to start scan.
The set channel is displayed in the table.
∫ Update Channel List
You can update channels to the latest one.
≥This takes about 3 minutes.
Digital TV Update Channel List
Scan CH 21
This will take about 3 minutes.
RF Ch
Channel Name
Digital TV:0 Radio:0
Searching
RETURN
"Finished" is displayed when the search is finished.
Press [RETURN ].
≥ After performing "Update Channel List" or "Manual Tuning" if the
channel number has already been assigned, channel number for them
will be assigned from 800ch onward.
MHz
10
10
Type New
69
Type Quality
75
VQT2J70