Software (Firmware) Update - Panasonic DMRBW880 Operating Instructions Manual

Software (Firmware) Update

Software of this unit can be updated automatically by the
following methods at the specified time.
(Default setting is 3 a.m.
≥From broadcasts
≥From Internet [Network connection and setting are
required. ( 13, 19)]
≥The time it takes to update depends on the connection.
– From broadcast: About 30 minutes to 1 hour
– From Internet: About 1 hour
∫ If a software (firmware) update is
available, a notification is displayed.
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
≥It is displayed on the channel information (
the Software (Firmware) can be updated immediately.
e.g.,
1
Dogs and Cats
9:00 - 11:00
Rating: PG HE-AAC
To execute, push the "Red" button while the channel
information is displayed, and follow the instructions on
the screen.
≥Update of the software (firmware) will start when the unit is
turned to standby mode.
84
VQT2J70
83, Software Update in Standby)
21) when
All Digital Channels
10:30
Select favourites
Now Software update
∫ The unit's display during the update
e.g.,
≥When "FINISH" is displayed, update of the software
(firmware) has completed.
You cannot operate the unit until the update is
complete. Removing the AC mains lead while the
update is in progress may damage the unit. Don't
remove the AC mains lead during the update.
≥ The download time depends on the network or broadcast environment.
≥ If the timer recording is scheduled within the following time at the start of
the download, the download will not be executed.
– From broadcast: Within 2 hours
– From Internet: Within 1 hour
≥ You can also download the latest software (firmware) from the following
website and burn it to a CD-R to update the software (firmware).
http://panasonic.jp/support/global/cs/
≥ If you do not want to perform the software (firmware) update, set the
"Software Update in Standby" to "Off". ( 83)