Others - Panasonic DMRBW880 Operating Instructions Manual

Changing the unit's settings

Others

∫ Standby Settings
Power Save in Standby
On It will go into the Power Save in Standby
mode.
On Timer "Power Save in Standby" is activated
when the set time comes.
≥If the clock has not been set, "Power
Save in Standby" is activated at all
hours.
Off It is possible to start quickly from the
standby mode. (Quick Start mode)
≥This function cannot be enabled when the DLNA
function is enabled in "Home Network ( DLNA )
Settings". ( 67)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
After the unit has finished operating, the unit will be
turned to standby mode once the set time has passed.
Automatic Standby after OTR
If "On" is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing Automatic Stop recording or One
Touch Recording (
Automatic Standby after Copy
If "On" is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing copy (
∫ Remote Control
Change the remote control code on the main unit and the
remote control if you place other Panasonic products close
together.
≥Use "BD 1", the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number button
([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
82
VQT2J70
24).
45).
≥Operation is possible only with Panasonic remote controls
with "IR6" printed at the bottom when the remote control
code of this unit is set to "BD 4", "BD 5" or "BD 6".
BLU-RAY DISC RECORDER
BLU-RAY DISC RECORDER
IR6
∫ Clock
If the time is not set correctly, use the settings listed in
the method below.
Clock
Automatic Daylight Saving Time
On
Automatic
Time Date
0 00 10 1
Please set the clock.
OK: access RETURN: leave
OK
RETURN
Automatic
This unit usually obtains time and date information from
digital broadcasts.
But, if the time is not set correctly, set it to "Off" and
perform "Manual Setting".
Daylight Saving Time
Select time offset from the standard time for Summer
Time.
≥If there is a gap between displayed time and actual
time, set this function.
Manual Setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
∫ PIN Entry
You can set/change the PIN. (
IR6
IR6
1 2010
74)