Job Location Table - Sharp UP-3301 Instruction Manual

■ Employee (continued)
NOTE
1
The server whom an employee code has been assigned cannot sign on unless the corresponding
*
employee clocks in.
2
Assign the manager who is responsible for adjustments to the employee's hours.
*
3
* For the details of these settings, refer to Note on "Job location table" described on the following page.
4
* If no job location table number is assigned for an employee time-in operation, job location no. 1 will
automatically be assigned.
Make sure to assign a job location table number for "LOCATION#1."

■ Job location table

You can program three functions for each job location table number which is assigned to employees.
Procedure
▼
Pertinent
➞
job location
table no.
▼
156
Program each item as follows:
• JOB LOCATE TBL (Use the numeric entry)
Job location table number (1 to 99)
• TEXT (Use the character entry)
Description for the job location table. Up to 8 characters can
be entered.
• SALARY AMOUNT (Use the numeric entry)
Salary amount paid for the employee (max. 4 digits: 0 to
9999)
• * OVER-TIME RATE-1 (Use the numeric entry)
Rate 1 for overtime work (max. 3 digits: 0.01 to 9.99)
• * OVER-TIME RATE-2 (Use the numeric entry)
ENTER
Rate 2 for overtime work (max. 3 digits: 0.01 to 9.99)
www.cashregisters.net