Panasonic 30 - Toughbook - Core 2 Duo Service Manual page 55

Ensure that both top and
bottom are hooked.
9.2.12. Setting the Audio PCB
1. Connect the Cable to the Connector. (CN901)
2. Fix the Audio PCB using the 3 Screws. <N9>
Note:
Tighten the Screws in the numbered order (No1 to No3).
Screws <N9> : DRSB2+5FKL
Screw
Battery FPC Ass'y
Screw
55 / 90
Insert the end of the Sheet into the space between the Main
Board and the bottom of the PCMCIA Slot.
(Left and Right 0.5mm, Apply 20 to 30N (2.0 to 3.0 Kgf))
Slide surface
Insert the FPC as illustrated
<N9>:No1
<N9>:No.2
Audio PCB
Attach it fitting to the right
0 0.5mm
0 0.5mm
SD Blind Sheet
<N9>:No.3
Connector(CN901)