Brother HL 1240 - B/W Laser Printer Service Manual page 87

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(22) Press the two catches holding the idle gear 13 to the frame and then remove the idle gear
13. Slide the first eject roller to the left until the slot in the roller shaft aligns with the slot in
the frame and then remove the roller by pulling it forwards.
Idle gear 13
(23) Remove the eight eject pinch rollers and pinch springs by lifting them upwards until the
springs release from the frame.
Fixing unit frame
Fixing unit frame
Eject pinch roller
First eject roller
Fig. 4-42
Fig. 4-43
4-24
Pinch spring