Table of Contents
Advertisement
MT8 User's Guide.fm Page 11 Friday, November 22, 2002 9:09 AM
Shutting down the projector
Power Save
Power
Turning off the projector
Power
Troubleshooting your setup
Table 2: LED behavior and meaning
LED color/behavior
solid green
blinking green
blinking red
The projector will not start up if the LED
is blinking red. You must correct the prob-
lem, disconnect and reconnect the power
cable, then power on the projector.
See page 34 for more information on
blinking red LEDs.
solid red
11
Meaning
The projector is plugged in, or the projec-
tor has been turned on and the software
has initialized. The projector has been
turned off and the fans have stopped.
The Power button has been pressed and
the software is initializing, or the projec-
tor is powering down and the fans are
running to cool the lamp.
A fan (blinks 4 times) or lamp (blinks 3
times) failure has occurred. Turn off the
projector and wait one minute, then turn
the projector on again. Also check for a
blocked vent or a stopped fan (blinks 5
times).
An unidentifiable error: please contact
Technical Support.
Advertisement
Table of Contents
