HP 6400/8400 User Manual page 101

Table 21 Error Messages (continued)
Status Code Value
78
Invalid object condition for this
command.
79
Snapshot (or snapclone) deletion
in progress. The requested
operation is currently not
allowed. Please try again later.
80
Invalid Volume Usage
81
Minimum Volumes In Disk Group
82
Shutdown In Progress
83
Controller API Not Ready, Try
Again Later
84
Is Snapshot
85
Cannot add or remove DR group
member. Mirror cache must be
active for this Vdisk. Check
controller cache condition.
86
Command View EVA has
detected this array as
inoperative. Contact HP Service
for assistance.
87
Disk group inoperative or disks
in group less than minimum.
88
Storage system inoperative
89
Failsafe Locked
90
Data Flush Incomplete
Meaning
The current condition or state is preventing
the request from completing successfully.
The current condition of the snapshot,
snapclone or parent virtual disk is preventing
the request from completing successfully.
Case 1: The disk volume is already a part
of a disk group.
Case 2: The disk volume usage cannot be
modified, as the minimum number of disks
exist in the disk group.
The disk volume usage cannot be modified,
as the minimum number of disks exist in the
disk group.
The controller is currently shutting down.
The device is not ready to process the
request.
This is a snapshot virtual disk and cannot be
a member of a Continuous Access group.
An incompatible mirror policy of the virtual
disk is preventing it from becoming a
member of a Continuous Access group.
Case 1: A virtual disk is in an inoperative
state and the request cannot be processed.
Case 2: The snapclone cannot be associated
with a virtual disk that is in an inoperative
state. 86 Command View EVA has detected
this array as inoperative. Contact HP Service
for assistance.
Case 3: The snapshot cannot be associated
with a virtual disk that is in an inoperative
state. Report the error to product support.
The disk group is in an inoperative state and
cannot process the request.
The storage system is inoperative and cannot
process the request.
The request cannot be performed because
the Continuous Access group is in a failsafe
locked state.
The disk cache data need to be flushed
before the condition can be resolved.
How to Correct
Resolve the condition and retry the
request.
Wait for the operation to complete
and retry the request.
Resolve the condition by setting the
usage to a reserved state and 80 retry
the request. Invalid Volume Usage
Report the error to product support.
Resolve the condition by adding
additional disks and retry the request.
No action required.
Retry the request at a later time.
No action required.
Modify the mirror policy and retry the
request.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Resolve the condition and retry the
request.
Retry the request later.
101