5.
Repeat steps 3 and 4 for the second rail.
Installing the enclosure into the rack
To install the enclosure into a rack:
1.
Secure the front end of the rails to the rack.
IMPORTANT:
Do not remove the pins from the ends of the rack rails unless you are converting the rails for use
in round-hole racks. These load-bearing pins are designed to fit through the holes without being
removed.
IMPORTANT:
Be sure that the scissor-type locking latches engage the rack fully when the pins extend through
the holes marked with the template.
NOTE:
Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal.
2.
Secure the back end of the rails to the rack.
15600
15485
23
user guide