Rack Mounting Hardware Kit Contents; Converting Rails For Round-Hole Racks - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Rack mounting hardware kit contents

The rack mounting hardware kit provides the required components for quick deployment in
Compaq-branded, HP-branded, and most square- and round-hole third-party racks. The adjustable
feature of the rack rails enables installation in racks with depths of 69.90 to 76.2 cm (27.52 to 30.00 in).
If you are installing the MSA70 enclosure in an M-Series rack, contact an authorized reseller to obtain an
M-Series Rack Rail option kit.
Item Description
1
Rack rail (left)
2
Rack rail (right)
3
Pins for round-hole rack conversion (8)
In addition to these supplied items, you may need a No. 2 Phillips screwdriver.

Converting rails for round-hole racks

The rack rails ship configured for square-hole racks. To convert the rack rails for use in a round-hole rack:
1.
Locate the bag of miscellaneous hardware that ships with the rack rails.
2. Locate the eight round-hole pins.
3. Use a No. 2 Phillips screwdriver to remove the standard pins from the front and back ends
of the rail.
4.
Install four round-hole pins into the rail.
22
Setting up the enclosure
1
2
3
15601
15489