Joining The Output Paper Together - Epson Stylus Pro 7890 User Manual

Epson Stylus Pro 9890/9908/7890/7908
Joining the output paper
together
The steps for joining the output paper together
differ between borderless poster printing and
poster printing with margins.
Borderless poster printing
This section describes how to join four printed
pages together. Check and match the printed
pages, and join them in the order indicated below
using an adhesive tape on the back of the sheets.
Poster printing with margins
When you select Overlapping Alignment Marks,
the following marks are printed on the paper. See
the procedures below to join the four printed
pages together using the alignment marks.
User's Guide
Printing Varieties
Note:
The alignment marks are black for black-and-white
printing.
The following describes how to join four printed
pages together.
A
Cut the upper left sheet along the
alignment mark (vertical blue line).
B
Lay the upper left sheet on top of upper
right sheet. Lineup the X marks as shown in
the illustration below, and temporarily
fasten them using an adhesive tape on the
back.
143