Epson Stylus Pro 7890 User Manual page 144

Epson Stylus Pro 9890/9908/7890/7908
C
While two pages are overlapping, cut them
along the alignment mark (vertical red
line).
D
Join the left and right sheets together.
Use an adhesive tape to stick the backs of
the sheets together.
E
Repeat steps 1 to 4 for the lower sheets.
F
Cut the bottom of the upper sheets along
the alignment marks (horizontal blue line).
User's Guide
Printing Varieties
G
Lay the upper sheet on top of the lower
sheet. Lineup the X marks as shown in the
illustration below, and temporarily fasten
them using an adhesive tape on the back.
H
While two pages are overlapping, cut them
along the alignment marks (horizontal red
line).
I
Join the upper and lower sheets together.
Use an adhesive tape to stick the backs of
the sheets together.
144