Epson Stylus Pro 7890 User Manual page 98

Epson Stylus Pro 9890/9908/7890/7908
Error messages
CALL FOR SERVICE
CODE NNNN
POWER OFF AND THEN ON.
IF THIS DOESN'T WORK,
NOTE THE CODE AND CALL
FOR SERVICE
User's Guide
Problem Solver
Description
If 3000 appears, the
power cord is not
plugged into the
electrical outlet or the
AC inlet of the printer
properly
A fatal error has
occurred.
98
What to do
Turn the printer off. Plug the power cord into
the electrical outlet or the AC inlet of the
printer properly. Then, turn the printer on and
off a few times. If this message appears on the
LCD panel again, contact your dealer.
See "When the call for service occurs" on
page 99
Turn the printer off, leave it for a while, and
turn the printer on again. If this message
appears on the LCD panel again, note the
code and contact your dealer.
See "When the call for service occurs" on
page 99