Philips BDL4245E/27 User Manual page 28

BDL3245E / BDL4245E / BDL4645E
Example: 5 x 5 screen matrix (25 monitors)
H monitors = 5 monitors
V monitors = 5 monitors
H monitors
1 2
6 7
11 12 13
16 17 18
21 22 23
• H monitors - Select the number of monitors on the horizontal side.
• V monitors - Select the number of monitors on the vertical side.
• Position - Select the position of this monitor in the screen matrix.
• Frame comp. - Choose to turn the frame compensation function on
or off. If turned on, the monitor will adjust the image to compensate
for the width of the monitor bezels in order to accurately display
the image.
Frame comp. - Off
Frame comp. - On
• Enable: Choose to enable or disable the Tiling function. If enabled,
the monitor will apply the settings in H monitors, V monitors,
Position, and Frame comp.
• Switch On Delay: {Off / Auto / 2, 4, 6, 8, 10, 20, 30, 40, 50}
NOTE: T he Tiling function will be disabled when the [ON/OFF]
button for PIP is pressed.
3 4 5
8 9 10
14 15
19 20
24 25
Heat status
This function allows you to check the thermal status of the monitor at
any time. The accuracy of the temperature indicated is +/- 5 degrees (C
or F).
Date and time
Adjust the current date and time for the monitor's internal clock.
Position
Date and time
1. Press [ ] button to enter the submenu.
2. Press [
{Day}, {Hour}, {Minute}, and {Daylight saving time} settings.
3. Press [ ] or [ ] button to adjust all settings except {Daylight
saving time}.
4. Press [SET] button to enter the {Daylight saving} submenu.
5. Press [ ] or [ ] button to select item, press [
to adjust.
Schedule
This function allows you to program up to 7 (seven) different scheduled
time intervals for the monitor to activate.
You can select:
• The time for the monitor to turn on and turn off.
• The days in a week for the monitor to activate.
• Which input source the monitor will use for each scheduled
activation period.
NOTE: Y ou should set up current date and time in {Date and time}
menu before using this function.
1. Press [SET] or [ ] button to enter the submenu.
Schedule
Today
2. Press [
~ 7), and then press [ ] button to mark it the item number.
20
Year
Month
Day
Hour
Minute
Daylight saving time
Current date time
2011 . 08 . 04
] or [ ] button to toggle among the {Year}, {Month},
2011 . 08 . 04 THU 20 : 19 : 55
1
2 On Off Input
3 : :
4
5 Every day MON
6 Wed THU
7 SAT SUN
] or [ ] button to select a schedule item (item number 1
2011
08
04
20
20
20 : 20 : 17
Press [SET] to set clock
] or [ ] button
TUE
FRI
Every week