Philips BDL4245E/27 User Manual page 38

BDL3245E / BDL4245E / BDL4645E
RS232C
RJ-45
HDMI Input
DVI-D Input
VGA Input
VGA Output
Component Input
General
Item
Power Supply
Power Consumption (Max)
Power Consumption (typ.)
Power Consumption (Standby & Off)
Dimension (With Stand) [W x H x D]
Dimension (Without Stand) [W x H x D]
Weight (With Stand)
Weight (Without Stand)
Gross Weight
Environmental Condition
Item
Temperature
Humidity
Pressure
Internal Speaker
Item
Type
Input
Impedance
Output Sound Pressure
Frequency Response
This LCD monitor supports HDMI CEC (Consumer Electronics Control) protocol through the OneWire function. This gives you the ability to control
your display through the HDMI connector using CEC commands. The command manual for this function is available separately.
NOTE: P hilips does not guarantee 100% interoperability with all HDMI CEC devices.
D-Sub Jack x 2 TXD + RXD (1:1)
(9 pin)
RJ-45 Jack x 1 10/100 Lan Port
(8 pin)
HDMI Jack x 1 Digital RGB: TMDS (Video + Audio)
(Type A) (18 pin) MAX: Video - 720p, 1080p, 1920 x 1080/60 Hz (WUXGA) Audio - 48 KHz/ 2 Channel (L+R)
Supports LPCM only
DVI-D jack Digital RGB: TMDS (Video)
D-Sub Jack x 1 Analog RGB: 0.7V [p-p] (75Ω), H/CS/V: TTL (2.2kΩ), SOG: 1V [p-p] (75Ω)
(15 pin) MAX: 720p, 1080p, 1920 x 1080/60 Hz (WUXGA)
D-Sub Jack x 1 Analog RGB: 0.7V [p-p] (75Ω), H/CS/V: TTL (2.2kΩ), SOG: 1V [p-p] (75Ω)
(15 pin) MAX: 720p, 1080p, 1920 x 1080/60 Hz (WUXGA)
RCA Jack x 1 Y: 1V [p-p] (75Ω), Pb: 0.7V [p-p] (75Ω), Pr: 0.7V [p-p] (75Ω)
MAX: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Specifications
AC 100 ~ 240V, 50 ~ 60Hz
270W
250W
<1W (RS232 in active)
1091.1 x 681.7 x 329.6 mm
991.6 x 645.7 x 133 mm
26.7 Kg
26 Kg
31 Kg
Specifications
Operational 0 ~ 40°C
Storage -20 ~ 60°C
Operational 20 ~ 80% RH (No condensation)
Storage 5 ~ 95% RH (No condensation)
Operational 795 ~ 1013 hPa (Altitude: 0 ~ 4,500 m)
Storage / Shipment 300 ~ 1013 hPa (Altitude: 0 ~ 9,000 m)
Specifications
1 Way 1 Speaker
10 W (RMS)
8Ω
82 dB/W/M
160 Hz ~ 13 KHz
30