Functional Execution Command Table; Image Command Table; Pc Adjust Control Command Table; Input Control Command Table - Sanyo PDG-DXL2000 - 2000 Lumens Specifications

PDG-DXL2000 Expand Serial Command Functional Specifications

5. Functional Execution Command Table

5.1 Image Command Table

Execute command
CF_BRIGHT_%1[CR]
CF_CONT_%1[CR]
CF_COLOR_%1[CR]
CF_TINT_%1[CR]
CF_SHARP_%1[CR]
CF_GAMMA_%1[CR]
CF_WBAL-R_%1[CR]
CF_WBAL-G_%1[CR]
CF_WBAL-B_%1[CR]
CF_COLTEMP_%1[CR]
CF_PROGV_%1[CR]
CF_NZRED_%1[CR]
CF_IMAGE_%1[CR]
CF_IMAGEADJ_%1[CR]

5.2 PC Adjust Control Command Table

Execute command
CF_FSYNC_%1[CR]
CF_TDOTS_%1[CR]
CF_CLAMP_%1[CR]
CF_H-POS_%1[CR]
CF_V-POS_%1[CR]
CF_PCSTORE_%1[CR]
CF_PCMODEFREE_%1[CR]

5.3 Input Control Command Table

Execute command
CF_INPUT_%1[CR]
CF_SOURCE_%1[CR]
CF_INPUT1 _%1[CR]
CF_INPUT2_%1[CR]
CF_INPUT3_%1[CR]
CF_INPUT4_%1[CR]
CF_INPUT5_%1[CR]
CF_INPUT_%1_%2[CR]
CF_SYSTEM_%1[CR]
Set Brightness value
Set Contrast value
Set Color value
Set Tint value
Set Sharpness value
Set Gamma value
Set White Balance Red value
Set White Balance Green value
Set White Balance Blue value
Set Color Temp. value
Set /Cancel Progressive Scan
Set/Cancel Noise reduction
Set Image mode
Reset/Store for Image Adjustment
Item
Set Fine Sync value
Set Total Dots value
Set Clamp Value
Set Horizontal Position value
Set Vertical Position value
Store the setting value of PC Adjust menu to Mode 1-10
Delete the registered value in Mode 1-10 and return it to
Free status
Item
Select Input
Select Input Source
Select computer-1 and source selected in %1
Select computer-2 and source selected in %11
Select HDMI and source selected in %1
Select Video and source selected in %1
Select S-video and source selected in %1
Select Input and Source
Select System
9/72
Item