Sound Adjustment - Sanyo PLC XU115 - XGA LCD Projector Owner's Manual

Sound Adjustment

Direct Operation
Volume
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Mute
Press the MUTE button on the remote control to temporarily
turn off the sound. To turn the sound back on, press the
MUTE button again or press the VOLUME +/– buttons. The
Mute function is also effective for the AUDIO OUT jack.
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
◄►
to the Sound Menu icon.

Use the Point buttons to move the red frame
▲▼
pointer to the desired item, and then press the SELECT
button.
Volume
Press the button to turn up the volume; press the
VOL+
button to turn down the volume.
Mute
Press the Point buttons to switch the mute function On/
◄►
Off. When the sound is turned off, "On" is displayed. Press
the VOLUME+/– buttons again to turn the sound back on.
Top Control
Remote Control
Volume Dialog Box
VOL-
Press the MUTE button to set the Mute function On
or Off. The dialog box disappears after 4 seconds.
Sound Menu
Approximate level of the volume.
Exit the Sound Menu.
Basic Operation
VOLUME+/-
buttons
POINT▲button
◄)
VOL- ( button
►)
VOL+ ( button
POINT▼button
MUTE button
Approximate level
of the volume.
Sound Menu icon
7