Sanyo PLC XU115 - XGA LCD Projector Owner's Manual page 45

Sharpness
Press the Point button to decrease the sharpness of the
◄
image; press the Point button to increase the sharpness
►
of the image (from 0 to 15).
Gamma
Use the Point buttons to adjust the gamma value to
◄►
obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off . ......... Disabled.
L1 .......... Lower reduction
L2 .......... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off . ......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film . ....... For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an "Image (1–4)" in the
Image Select Menu on page 43.
Quit
Exit the Image Adjust Menu.
 Notes:
• Noise reduction and Progressive cannot be selected when
480p, 575p, 720p, 1035i, or 1080i is selected (p.42).
• Reset and Store icons will be displayed when any adjustment
is made.
buttons to select one
▲▼
Video Input
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
t h e n p r e s s t h e
SELECT button.
Store icon
A confirmation box
appears and then
select [Yes].
5