4. Click the close button
⇒
The "ScanSnap Manager - Scan and Save Settings" window is closed.
Operation
5. Load the document onto the ScanSnap.
6. Press the [SCAN] button
⇒
The document is scanned in "Simplex Scan" mode.
To select the "Duplex Scan" mode again, go to
HINT
(Double-sided)" instead. The selected setting is valid until you change it again.
in the upper left corner of the window to close the window.
.
ScanSnap S300M Operator's Guide
6.1 Using ScanSnap Manager
Step 2
and select "Duplex Scan
6
139