Fujitsu PA03541-B105 Operator's Manual page 54

HINT
3. Select [Select a Profile] in the menu which pops up when clicking and holding the
ScanSnap Manager icon
specify a profile to use for scanning.
Operati o n
4. Load the document onto the ScanSnap.
5. Press the [SCAN] button
⇒
Scanning is started.
HINT
ATTENTION
34
When [Use Quick Menu] is marked, the document is scanned in Quick
Menu Mode. For details about Quick Menu Mode, refer to
documents in Quick Menu Mode" (page.
or click the ScanSnap Manager icon
Refer to "3.2 Paper Sizes of Documents to be Scanned" (page 39)
Loading Documents" (page 41)
on the ScanSnap.
•
By default, documents are scanned in "Duplex Scan" mode when you
press the [SCAN] button. With "ScanSnap Manager," you can change the
mode to "Simplex Scan" mode.
Refer to "4.2 Changing Scanning Settings" (page 47)
•
You can also start the scanning by using the ScanSnap Manager icon
in the Dock menu to select "Simplex scan" or "Duplex scan."
Refer to "4.1 About the ScanSnap Icon" (page 44)
•
Do not connect or disconnect other USB devices during the scanning
operation.
•
Do not close the paper chute during the scanning operation.
•
Do not switch the user to log in during the scanning operation.
28).
for more information.
"Scanning
, and
and "3.3
for more details.
for more details.