Table of Contents
Advertisement
D-View 5.1 User's Guide
displayed on the table. To increase the polling time, click the up-arrow button; to
decrease, click the down-arrow button.
The Reset button resets all ICMP statistics counters back to zero.
The Pause button pauses device polling.
The Resume button resumes device polling.
The following describes the various ICMP counters:
IcmpInMsgs is a read-only MIB object of the icmp group that displays the number of
ICMP messages received by the device. This count also considers those counted by the
icmpInErrors counter.
IcmpInErrors is a read-only MIB object of the icmp group that displays the number of
ICMP messages received by the device with ICMP-specific errors such as bad ICMP
checksums and bad lengths.
IcmpInDestUnreachs is a read-only MIB object of the icmp group that displays the
number of ICMP Destination Unreachable messages received by the device.
IcmpInTimeExcds is a read-only MIB object of the icmp group that displays the
number of ICMP Time Exceeded messages received by the device.
IcmpInParmProbs is a read-only MIB object of the icmp group that displays the
number of ICMP Parameter Problem messages received by the device.
IcmpInSrcQuenchs is a read-only MIB object of the icmp group that displays the
number of ICMP Source Quench messages received by the device.
IcmpInRedirects is a read-only MIB object of the icmp group that displays the number
of ICMP Redirect messages received by the device.
IcmpInEchos is a read-only MIB object of the icmp group that displays the number of
ICMP Echo (request) messages received by the device.
IcmpInEchoReps is a read-only MIB object of the icmp group that displays the number
of ICMP Echo Reply messages received by the device.
IcmpInTimestamps is a read-only MIB object of the icmp group that displays the
number of ICMP Timestamp (request) messages received by the device.
IcmpInTimestampReps is a read-only MIB object of the icmp group that displays the
number of ICMP Timestamp Reply messages received by the device.
IcmpInAddrMasks is a read-only MIB object of the icmp group that displays the
number of ICMP Address Mask Request messages received by the device.
IcmpInAddrMaskReps is a read-only MIB object of the icmp group that displays the
number of ICMP Address Mask Reply messages received by the device.
128
Advertisement
Table of Contents
