Table of Contents
Advertisement
D-View 5.1 User's Guide
Device SNMP Configuration
You can change the SNMP configuration of the device. Otherwise, you will use the
default settings.
Starting Off in D-View 5.1
When D-View is run the first time it will automatically search all around the net
domain and parse the contents in the network. It then creates a database to store the
data and creates tree lists, icon lists and the like in its work area.
Since this default search is just a rough search with quick response time it usually
loses some hosts. Hosts not discovered the first time could be found using the Discover
functionality by giving it a net domain and using unicast SNMP rule. You can search
more thoroughly using Discover but this search will be slower than the initial one.
Discover
Use this menu to search for a single device or several devices using the IP address or a
selected range of IP addresses.
In the Discover window, define the following variables:
♦ IP Address – Type in a range of IP addresses or a single IP address (in both
"From" and "To" spaces). Keep in mind that the time needed to do the search
increases as the range of addresses searched becomes larger.
♦ SNMP Read – Type in the read community string.
♦ Time Out – Range variable from 1000 to 10,000 milliseconds
41
Advertisement
Table of Contents
