D-View 5.1 User's Guide
Repolling Configuration
By default D-View polls the network for status updates every 30 seconds. This repolling
configuration can be changed or turned off using the Repolling Configuration menu
under System. Adjust the polling interval from 10 to 60 and the time out (1-10 seconds)
and click the Set button to put the settings into effect. Turn off repolling by checking
the Don't Repoll box and clicking Set. Default repolling configuration = 30 sec Interval,
3 sec Time Out.
System Repolling Configuration
Community String Configuration
Set the Read and Write Community String to allow D-View management access to
SNMP devices.
System Community String Configuration
♦ Read Community String: input read community string
♦ Write Community String: input write community string
♦ OK: click to put settings into effect
Figure 21
30