Preparing The Remote Control - Kenwood KRF-V6200D Instruction Manual

∞
TUNING 1/¡ keys
Use to fast backward/fast forward the file of the USB source.
Use to select the radio station. ¤
Use to operate the Kenwood DVD player.*
§
DISPLAY key
Use to display the tag information of the USB source.
Use to display RDS information. fi
TIME DISPLAY key
Use to switch the display of the USB source between play
time display and file number display.
¶
FOLDER PREV. key
Use to select the previous folder of the USB source.
FOLDER NEXT key
Use to select the next folder of the USB source.
•
PTY key
Use for PTY search.
Note:
• * For how to be able to use the keys to operate the Kenwood
DVD player, see <Remote control operations for Kenwood DVD
players> ‚.

Preparing the remote control

Loading batteries Loading batteries
œ Remove the cover.
∑ Insert batteries.
• Insert two (R03) batteries following the polarity indications.
é Close the cover.
¢
¢
¢
fi
Operation Operation
When the Standby indicator is lit, the power turns ON when you
press [ RECEIVER] on the remote control unit. When the power
comes ON, press the key you want to operate.
Operating range (Approx.)
Standby indicator
Infrared ray system
• When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
Notes:
1. The supplied batteries may have shorter lives than ordinary
batteries due to use during operation checks.
2. When the remote-controllable distance gets shorter than before,
replace both batteries with new ones.
3. Placing the remote sensor in direct sunlight, or in direct light from
a high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to
prevent malfunction.
Remote sensor
7
English