Digital Connections - Kenwood KRF-V6200D Instruction Manual

Digital connections

The DIGITAL IN jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or
standard PCM (CD) format digital signals.
If you have connected any digital components to this unit, be sure to read the <Selecting the input mode> ™ carefully.
CD or DVD player
Note:
• * Connect the video signal and analog audio signals to the VIDEO 2 jacks. (<Connecting video components> @)
COAXIAL
OPTICAL
DVD / 6CH
CD/DVD
DIGITAL IN
COAXIAL
DIGITAL OUT
(AUDIO)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT*
Australia
Other countries
OPTICAL
VIDEO2
¤ CAUTION
Do not connect power cords from
components whose power consumption
is larger than what is indicated on the AC
outlet at the rear of this unit.
Optical fiber
cable
OPTICAL
DIGITAL OUT
(AUDIO)
To AC wall outlet
x1
x2
9
English