Recording Onto Md - Kenwood MDX-G3 Instruction Manual

Recording onto MD

Desired music source can be recorded onto
MDs.
4 ¢
AUX
T APE
MD REC CD
MD
TAPE
TUNER FM /AM
Main unit only
1
Insert a recordable MD.
2
Select the music source to be re-
corded.
: Press the CD 6 key.
CD
Tape : Press the TAPE ` key.
Radio : Press the TUNER FM/AM key.
AUX component : Press the AUX key.
If a CD or tape has already been loaded
in advance, it starts to be played auto-
matically now. press the 7STOP key
to stop it.
3
Press the MD REC key.
The unit enters record-pause mode.
Display in MD record-pause mode
0 0 1
EX. BASS
4
When the recording source is
ready for playback, press the MD
REC key again.
36
EN
7 STOP
6
6
23
R 7 4 : 0 0
5
Play the recording source.
To stop recording :
Press the 7STOP key.
To let recording pause :
Press the MD 6 key during recording.
Press the MD 6 or MD REC key to
resume recording from the pause.
In case a message is displayed and record-
ing will not start :
See "Display message list" (pages 68&69).
Tips for recording CD onto MD
When the MD recorder in record-pause
mode, the recording can be started automati-
cally at the same time as the playback of CD
is started. (Sync recording)
(1) Put the CD player in play-pause mode.
(2) Select the track to be recorded first
by pressing the 4 or ¢ key.
The CD player enters pause (play-
pause) mode at the beginning of the
selected track.
(3) Press the MD REC key to put the MD
recorder in record-pause mode.
Press the CD 6 key to start playing
(4)
the CD.
÷ Be careful not to turn power off or apply
shock or vibrations to the system while "MD
WRITING" is displayed.
÷ The MD cannot be inserted or ejected in the
STANDBY mode of power (page 71). Forc-
ing an MD to be inserted or ejected may re-
sult in damage.
÷ When the CD output is recorded onto MD,
the digital signal is recorded automatically.
When the radio or tape output is recorded
onto MD, the analog signal is recorded auto-
matically.