Adjusting The Present Time - Kenwood MDX-G3 Instruction Manual

Adjusting the present time

To use the timer function, it is required to
set the built-in clock of the unit to the cor-
rect time. The clock shows the time of day
in 12-hour system.
1
7 STOP
T APE
Main unit only
1
Press the POWER
power on.
2
Press and hold the MENU key
for more than 2 seconds.
A D J U S T
3
Rotate the VOLUME/MULTI-CON-
TROL knob to select the figure of
hour.
Example : Adjustment to AM 8:07
A D J U S T
12 o'clock of day is displayed as "PM
12:00" and 12 o'clock of night is dis-
played as "AM 12:00".
3 5
,
4 6 2
,
key to turn
4
Press the SET key.
A D J U S T
5
Rotate the VOLUME/MULTI-CON-
TROL knob to input the figure of
minute.
A D J U S T
6
Press the SET key.
To check the time of day :
Press the 7STOP key while the unit is in
the STANDBY mode (page 71).
÷ After a power failure, when the power cord
is unplugged and plugged again or when the
STANDBY/TIMER indicator blinks in green,
the present time should be adjusted again.
÷ In step 6, accurate time adjustment is pos-
sible by pressing the SET key at the same
time as a time announcement indicating the
00 second of the minute.
7
EN